TOA Latex Glue 4 oz.

TOA Latex Glue No.LA-22S Size per bottle: 4 oz. General Purpose Application This model of latex glue is designed to support all types of handicrafts and woodwork. It is suitable for porous material surfaces with good water absorption, such as assembling small wooden furniture parts, wood repairs, model making, gluing cardboard boxes, documents, handmade books, papier-mâché, as well as various crafts and art projects within schools or residential homes. TOA Latex Glue No.LA-22S is a high-quality glue. The glue texture appears as a thick white liquid with an optimal viscosity—not too watery to cause runs and drips, and not too thick to make spreading difficult. This allows the glue to penetrate excellently into porous material surfaces. Once completely cured, the white glue transforms into a transparent, translucent film, leaving no messy white stains behind, which helps keep the workpiece clean and beautiful. It features Anti-Fungi protection by incorporating a highly effective anti-mold agent.
Ordering – TOA Latex Glue 4 oz. Customers can order with
– Minimum 1 or Maximum1 (MOQ)  per order. TOA Latex Glue 4 oz. 2 bottles .
– Minimum 1 or Maximum1 (MOQ) per order.  TOA Latex Glue 4 oz. 3 bottles .
TOA Latex Glue Product Overview information
Product Name: TOA Latex Glue
Brand: TOA
Size per bottle: 4 oz.
Weight per bottle:142g
Formula: Hygienic Latex Adhesive and General Purpose
Model: No.LA-22S
Application: For bonding workpieces together. Can be used for “all types of handicrafts and woodwork.” Suitable for porous surfaces, small wooden furniture assembly, wood repairs, wooden house/airplane model making. Paper and document work: gluing cardboard boxes, handmade books, papier-mâché, and school crafts. Fabric and other materials: fabric gluing, wallpaper, crafts using hemp rope or yarn.
Key Features and Main Selling Points
– Infused with anti-mold agents
– Thick glue texture
– Transparent once dry

Storage: The screw cap should be tightly closed after every use to prevent air from entering and causing the glue to dry out and harden inside the bottle. It should be stored indoors, avoiding direct sunlight and high heat.
Full detail TOA Latex Glue No.LA-22S
TOA Latex Glue No.LA-22S is a high-quality General Purpose Polyvinyl Acetate Emulsion Glue (PVA Glue) featuring a highly concentrated texture with excellent and consistent bonding efficiency. The most prominent highlight of this model is its classification as a “Hygienic Latex Adhesive,” which contains highly effective anti-mold additives and remains non-hazardous to the skin or respiratory system under general usage conditions.

1.Key Features and Main Selling Points
– Anti-Mold Infused: Clearly marked with a blue circular icon indicating anti-fungal protection (Anti-Fungi), allowing the bonded workpiece to have a longer service life without developing black mold even in humid conditions.
– Safe and User-Friendly: Certified as a hygienic adhesive, safe from mercury and lead, and can be used safely in school children’s craft projects.
– Thick Glue Texture: The adhesive possesses optimal viscosity—neither too runny to drip nor too thick to spread—enabling the glue to absorb well into material surfaces.
– Transparent Once Dry: When the glue is completely cured, the originally white texture turns into a clear, translucent film, leaving no messy white residues on the workpiece.
Recommended Applications
As stated on the label: “For all types of handicrafts and woodwork.” Suitable for Porous Surfaces such as:
– All types of wood: small wooden furniture assembly, wood repairs, wooden house/airplane model making.
– Paper and documents: cardboard box gluing, handmade books, papier-mâché, and school crafts.
– Fabric and other materials: fabric gluing, wallpaper, crafts using hemp rope or yarn.
Application Steps for TOA Latex Glue No.LA-22S
1.Surface Preparation Stage
– Cleaning: Wipe away all dust, grease stains, debris, or old glue residue from the surfaces to be bonded. (If it is wood, gently sand with sandpaper to open up the wood grain for better glue absorption).
– Check Dryness: Both material surfaces must be completely dry, as residual internal moisture will cause the glue to loosen and fail to reach its full bonding potential.
2.Glue Application Stage
– Open and Stir: Twist open the screw cap. If it has not been used for a long time, stir the adhesive thoroughly to ensure a uniform consistency.
– Apply Glue to Surface:
– Use a small spatula, brush, or fingertip to spread the adhesive onto one side of the material surface into a thin, even film.
Caution: Do not apply too thickly, as it will cause the glue to dry slowly and overflow messily onto the workpiece.
High Water Absorption Materials: If bonding materials that highly absorb glue, such as thick fabric or soft wood, apply a thin layer of glue to both sides and let it rest for a moment before bonding them together.
3.Bonding & Clamping Stage
– Join Workpieces: Bring the two materials together into the correct position immediately while the glue in this bottle is still wet.
Apply Pressure:
– Paper/Fabric: Press or smooth down with hands, then suspend or weigh down with a heavy object (such as a book).
– Wood: A C-Clamp or adhesive tape should be used to securely clamp and hold the pieces together so that the wood joints are tightly compressed.
– Wipe Excess Glue: If glue leaks or overflows from the sides, immediately wipe it away with a damp cloth. Do not let it dry, as it will become difficult to remove and will leave stains.
4.Curing Time Stage
– Initial Setting Time: Leave it undisturbed without moving the workpiece for approximately 20 – 30 minutes (the glue will begin to turn from white to clear).
– Full Cure Time: The latex glue will be completely cured and achieve maximum load-bearing strength after being left for 24 hours.
5.Storage After Use
– Clean Bottle Mouth: After finishing use, take a clean cloth to wipe off any glue residue around the bottle mouth first.
– Close Cap Tightly: Twist the screw cap shut tightly immediately to prevent air from entering the bottle, which causes the glue to clump or harden inside.
Suitable Locations for Using TOA Latex Glue No.LA-22S
TOA Latex Glue No.LA-22S is designed to perform best primarily in “Indoor & Dry Areas.” Since it is a water-based adhesive, it has certain limitations and specific ideal operational environments as follows:
1.Best Suited Locations
– Classrooms, Offices, or Art Studios: Highly suitable for crafts, models, paper, and general handicrafts because it is safe and free of harsh odors.
– Inside the Home (Living Room, Bedroom): Used to repair particle board wooden furniture, wallpaper, picture frames, or interior decorative items that are not exposed to water.
– Factories or General Woodworking Workshops: For applying and bonding wood joints in indoor furniture assembly before reinforcing with nails or screws.
2.Ideal Environment
– Normal Room Temperature: The glue will set and dry best in standard room temperatures with proper ventilation.
– Low Humidity Areas: Although the glue contains anti-mold properties, it is meant for protecting against general atmospheric moisture, not for water submersion or exposure to rain.
3.Areas to Avoid
– Outdoors: Do not use for work that must face sunlight, rain, or water splashes, as water will easily dissolve the glue texture and cause it to peel off.
– Bathrooms or Kitchens (High Moisture Areas): Areas with condensation or constant water splashes will rapidly degrade the bonding efficiency of the adhesive.
– Non-porous Surfaces: Not suitable for bonding on glass, metal, glossy plastics, or tiles, as latex glue requires a slightly porous surface for the adhesive to penetrate and grip effectively.
Storage After Use
– Clean Bottle Mouth: After finishing use, take a clean cloth to wipe off any glue residue around the bottle mouth first.
– Close Cap Tightly: Twist the screw cap shut tightly immediately to prevent air from entering the bottle, which causes the glue to clump or harden inside.

QR-код